Bring a touch of warmth and comfort to any room with ArdexFlexbone® Heat In-Floor Heating Systems — the design innovation of the Flexbone®Heat Uncoupling Membrane, German-engineered, high-performance, energy-efficient heating cables and three thermostat choices, including a Smart Wi-Fi-enabled thermostat. The Ardex Flexbone®Heat system delivers a very unique design and technology that delivers maximum heat comfort with energy saving efficiency, delivered as an Ardex single source complete system.
Bosti-Set™ is a one-component, non-sag, easy-to-trowel adhesive and sound reduction membrane that is specifically formulated for the installation of thin (gauged) porcelain tile panels on interior, vertical surfaces or countertops. Bostik'spatent-pending Tenirex™ Polymer Technology provides the adhesive remarkable instant grab and holding power, enabling panels to be rapidly set on walls and repositioned for up to 30 minutes with no slip or sag. Once cured, Bosti-Set™ has a bond that remains tough, yet flexible for durability and sound abatement.
RedGard®Liquid Waterproofing and Crack Prevention Membrane from Custom®Building Products is a ready-to-use, elastomeric product with outstanding adhesion that provides a seamless waterproof barrier and reduces crack transmission in floor installations. RedGard®may be installed using a paint roller, trowel or airless sprayer, with one coat helping isolate subfloor movement up to 1/8inch and two coats waterproofing. Designed for both interior and exterior substrates, it exceeds ANSI A118.10 and ANSI A118.12, and can achieve a heavy-duty service rating.
www.custombuildingproducts.com
Laticrete®Hydro Ban®is a thin, liquid-applied, waterproofing and anti-fracture membrane designed to save construction professionals time and money on the jobsite. Thanks to its rapid-drying formula, installations are completed quicker which allow installers a faster time to tile. While other waterproofing membranes on the market can take up to a week to cure before allowing for flood tests, Hydro Ban can be tested in as little as two hours. Moisture issues related to failed floor tests are not a concern with this product’s proven reliability.
Planitop 330 Fast from MAPEI is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar. Applied from 1/8- to 1 1/4-inch-thick in a single coat, it’s used for ramping, smoothing and leveling clean interior and exterior concrete and screed floors in preparation for ceramic, stone or waterproofing system installations. Mixed with water, Planitop 330 Fast produces a non-sagging mortar that bonds directly to the substrate, providing a superior flat finish allowing tile installation in as little as 90 minutes.
Maxxon, the makers of Gyp-Crete®, have developed a new kind of sound control mat ideal for multifamily renovations and concrete multifamily construction. Acousti-TopTM, made of a patented blend of acoustical fibers, is less than 1/16-inch-thick, and is compatible with a range of flooring materials and adhesives. Perfectly suited for carpet to hard surface conversions, Acousti-Top delivers reliable sound reduction without adding to the height of the floor system. It is rated high performance for crack isolation and will not support mold growth.
Fracture Guard FD is a low VOC, fast-drying crack isolation membrane specifically formulated by Merkretefor same-day tile installations. Fracture Guard FD provides a thin protection layer to inhibit substrate crack transfers up to 1/8inch. Because Fracture Guard FD is a liquid-applied membrane, it conforms to any shape or pattern, thus allowing endless architectural designs. Used on both residential and commercial interior and exterior applications, Fracture Guard FD exceeds ANSI A118.12 and offers essential crack prevention protection to the finished tile and stone surface.
Prodeso from Progress Profiles is an uncoupling and waterproofing membrane in polyethylene with drop-shaped cavities, suitable for indoor/outdoor areas. Provided on both sides with a non-woven polypropylene thermos-welded fleece, which ensures the adhesion to the support and the bonding to the floor, the membrane guarantees the application even in cases of old tiles. Prodeso facilitates the laying of all kinds of flooring, drastically reducing work time, and waterproofs the substrates in the case of overlaying on cracked or imperfectly cured floors.
Prova®Tile Underlayment Systems by M-D Prooffer a unique and cost-effective alternative to uncoupling membranes. The innovative designs provide simple solutions for quick and easy installations. Get ultimate strength and durability provided by the Shear Stress Control ®system so tile floors can stand the test of time. Prova-Flex®and Prova Flex-Heat both have a vapor management system that allows for below-grade installation, are rated “extra heavy” by the TCNA under ASTM C627, and offer a 25-year composition/5-year performance warranty.
Schluter-Systems’ Ditra-Heat-Duo is the first electric floor warming system with an integrated uncoupling and thermal break. The thin thermal break on the underside of the membrane allows the system to warm tiled floors up to 70% faster over concrete substrates by directing heat to the tile, not to the subfloor. The all-in-one system means faster and simpler installation as the uncoupling membrane, heating cables and thermal break are all combined in a single layer. The system has all of the same attributes as Ditra-Heat and the total assembly is only 5/16-inch-thick.
Southcrete 1132 by SGM is a single-component, water-based, brush- or roller-applied thin, load-bearing liquid membrane for use under thinset and thick bed mortar applications as a waterproof or anti-fracture membrane. Suitable for use under ceramic/vinyl/rubber tiles, dimension stone, brick, parquet and strip wood, its elastomeric properties reduce the risk of substrate cracks transferring above to the hard surface flooring. SC-1132 provides a continuous moisture barrier with outstanding adhesion to concrete, cured Portland cement mortar beds, cementitious tile backer board and exterior plywood.
USGDurock™ Brand Liquid Waterproofing and Crack Isolation Membrane is ideal for waterproofing wet areas from showers, including continuous-use residential and commercial steam showers, to flooring assemblies and countertops. This liquid membrane provides a sealed waterproof barrier in a single-step application when administered over vertical smooth surfaces or in a two-ply application when used on rough surfaces and all horizontal surfaces. Its fast-drying time allows for quick turnaround on the jobsite.
Report Abusive Comment