Learn more about the newest sealer products on the market.
Custom Building Products
Aqua Mix® Sealer’s Choice® Gold from Custom Building Products is a premium penetrating sealer formulated to provide maximum stain protection. This low-VOC, water-based sealer provides a no-sheen, natural look that is ideal for use in food preparation and serving areas. This sealer achieves optimal penetration into dense, low-porosity surfaces. Rapid curing protects in less than four hours while allowing moisture vapor transmission. Designed for both interior and exterior applications, count on Sealer’s Choice Gold with a wide range of surfaces, including natural stone and textured porcelain tiles.
Stain Proof Porcelain & Quartz Sealer™ by Dry Treat is a premium, impregnating sealer developed for porcelain and quartz surfaces with low absorption. Porcelain & Quartz Sealer features nano-size sealing molecules that will seal the micro pores in porcelain and quartz surfaces. Suitable for indoor and outdoor use, it repels oil- and water-based stains, holds up to commercial cleaners and cleaning equipment (High Alkaline included), and will not change (COF) of the surface.
Stonetech® BulletProof® Sealer from Laticrete is a water-based, penetrating sealer that provides maximum stain and antimicrobial product protection while preserving a natural surface look. This premium sealer offers the best protection on the most porous natural stone, tile, masonry and grout surfaces in interior and exterior applications. Featuring Microban® antimicrobial protection, Stonetech BulletProof Sealer continuously inhibits growth of stain- and odor-causing bacteria, mold and mildew on surfaces. It’s a safer, professional-grade alternative to high-VOC, solvent-based sealers that is better for consumers and the environment and comes with a lifetime product satisfaction guarantee.
MAPEI’s UltraCare Penetrating SB Stone, Tile & Grout Sealer is a natural-look, solvent-based penetrating sealer that provides maximum protection against most common stains. Safe for use on all interior and exterior natural stone, unglazed porcelain and ceramic tiles, quarry tiles, masonry and cement grout, it can also be used as a pre-grouting sealer. It provides 60% more penetration into porous surfaces than the leading competitive sealers. UltraCare Penetrating SB Stone, Tile & Grout Sealer provides porous stone and tile installations with the deepest protection available, and gives floors better resistance to common oil- and water-based stains.
Prodeso® Drain from Progress Profiles is a waterproofing, draining, uncoupling membrane that favors vapor management, with a thickness of 5 mm. It is composed of a high-density polyethylene sheet with a draining layer thermo-welded at the top; a non-woven polypropylene fabric is glued to the bottom. Thanks to the air chamber below the floor, a micro-ventilation facilitates the drying of the adhesive, even in case of large-format tiles, and reduces efflorescence formation and triacetate rising in joints. The membrane can be applied on substrates that are not perfectly cured, on old tiles or Plywood/OSB.
Prova-Seal™ is a 100%-waterproof, premium, hybrid silicone sealing and bonding compound. The sealant cures within one hour and even quicker in the presence of moisture or humidity. It creates a watertight, flexible seal that will not shrink, crack or crumble. Prova-Seal can be used to waterproof and seal pipe and valve protrusions in the Prova-Shower System® and is required for the installation of Prova Board® Plus. It is also great for sealing cracks, joints and seams around sinks, counters, hardboard and flashing, penetrations and more. Once applied, Prova-Seal can be painted in 30 minutes and exposed to water in one hour.
Skudo Universal Plus from Tenax is a strong, water-based sealer that provides excellent water-oil stain protection. Ideal for company materials and stones that are hard to seal, Skudo Universal Plus doesn’t change the appearance of the material and won’t alter the natural breathability of the stone. A high capacity of penetration into more company material allows extra protection. Skudo is ideal for indoor and outdoor use, dries quickly and has a low-VOC emission. It can also be applied on surfaces that are not completely dry. It is great for use on porcelain, ceramic, marbles, granites and cement. A pre-grout version is also available.
Back to Top