Sealing interior and exterior surfaces with Aqua Mix® Sealer’s Choice® Gold from Custom® Building Products will prevent unsightly stains and permanent damage. Aqua Mix® Sealer’s Choice® Gold is a premium, no-sheen, natural look, water-based, penetrating sealer designed to maximize protection against undesirable stains without hurting the tile. It incorporates high-quality polymers that penetrate into the pores of tile, stone and grout so stains can be safely cleaned off of the surface before causing permanent damage.
www.aquamix.com
Laticrete® Stonetech® quartz and porcelain tile sealer is a premium water-based sealer designed to protect quartz, porcelain tile and medium-to-dense surfaces from oil, water and most stains — all while preserving the natural look of the surface. The sealer can also be used as a grout release for porcelain tile.
www.laticrete.com
Merkrete Grout Sealer is a water-based, easy-to-apply, penetrating silicone sealer for new or old Portland cement grouts. It penetrates into the pores of the surface to form a barrier that is resistant to moisture and stains, while allowing complete vapor transmission. Also, Merkrete Grout Sealer can be used for concrete, porous stone and masonry surfaces. It quickly penetrates, producing a sub-surface hydrophobic reaction below the surface, and does not change the look of most surfaces, leaving a clean, natural look.
www.merkrete.com
511 Quartz Countertop Sealer from Miracle Sealants is an impregnating sealer designed for water, stain and slip protection of all quartz and medium-to-dense porous surfaces. This unique formula forms an invisible barrier that is resistant to moisture and stains, while allowing vapor to escape. This product comes in an easy and ready-to-use spray, and can be used for interior and exterior surfaces. 511 Quartz Countertop Sealer is not a surface coating and will not alter the natural look.
www.miraclesealants.com
SubSeal® from NAC Products is a one-part, elastomeric, waterproofing membrane for interior and exterior applications. SubSeal® cures to form a thin, flexible layer that is an impervious water barrier providing exceptional waterproofing protection. SubSeal® bonds to the substrate with superior adhesion and meets ANSI A118.10 for thin-bed, load bearing waterproof membranes. SubSeal® protects tile and other hard surface floors from substrate movement up to 1/8 inch, and can be used at floor-to-wall and wall-to-wall joints, drains, protrusions and all perimeters. SubSeal® is a perfect application for any installations requiring waterproofing.
www.nacproducts.com/subseal
Profoil Panel from Progress Profiles is a high-density extruded polystyrene panel provided on both sides, with a waterproofing membrane that guarantees a secure tile installation. The panels are light and versatile and can be applied to any substrate, wall or ceiling; they are easy to handle, making space for creativity and significantly saving time. Panels, with a standard format of 3 x 5 feet, are available in thicknesses of 1/4 inch, 3/8 inch, 1/2 inch, 1 inch, 1 3/8 inch and 2 inches.
www.progressprofiles.com
Designed for use over unsealed brick pavers, concrete, Mexican-clay and any other unglazed surfaces where a natural look is desired, SGM grout sealer is a non-flammable, invisible, stain-resistant, water-based sealer. The sealer is resistant to water, oil- and acid-based contaminants, simplifies maintenance and does not change the appearance of grout. The sealer permits moisture vapor transmission and for new installations. SGM Grout Sealer can be applied 48 hours after grouting.
www.sgm.cc
Report Abusive Comment