Been hankering to learn about substrate prep and large-format tile installation or gauged porcelain tile panel installations? Well take heart, because the National Tile Contractor Association (NTCA) has day-long free training programs on these topics in Georgia and Kentucky scheduled for July.
On Friday, July 8th, tile contractors will have the opportunity attend the Substrate Prep/LFT training at Floor & Decor at 1599 Memorial Drive Southeast, Kirkwood, GA. Trainers Matt Welner and Chad Jones will present the program. For more information, contact Michael Stettler at 194CEM@FLOORANDDECOR.COM or 470.372.4500.
On Wednesday, July 13th, GPTP/Slabs Training will come to Norcross, GA., sponsored and hosted by Florida Tile at 1455 Oakbrook Dr. NTCA Trainers Matt Welner and Chad Jones will present the program. For more information, contact Don Miligan at firstname.lastname@example.org or phone 770.769.1760.
Later in the month, the trainings repeat at Louisville Tile, both at 3939 Produce Rd., in Louisville, KY, sponsored by Crossville. The Substrate Prep/LFT training will take place on Wednesday, July 20th, and the GPTP/Slab Training commences the next day on Thursday, July 21st at the same location. NTCA Trainers Robb Roderick and Chad Jones will present the program. For more information for either session, contact Marc Mularoni at email@example.com, phone 330.283.3997.
These all-day trainings begin at 7:30 a.m.
What to expect
The Substrate Preparation and Large-Format Tile Training will show you how to use the ANSI A 108 standards and TCNA Handbook to address real world challenges in hands-on installations focusing on substrate examination and preparation for setting large-format tile.
The program will address:
- ANSI standards and how to apply them
- How to use the TCNA Handbook
- Different substrates and standards that apply to them
- Substrate preparation
- Setting large-format tile
The GPTP/Slabs Training can give you the grounding to install these panels with confidence and accuracy. This free training will teach you the new tile industry standards and methods for installing GPTP. You’ll also learn how GPTP is made, where it can be used and the special tools, setting materials and techniques required to install it.
This program will emphasize:
- Introduction to tile industry standards
- Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels
- Use of specialty tools and setting materials to install GPTP
- Working with a team to install GPTP
If your July schedule is full, plan for one of the three all-day regional trainings NTCA will conduct in August:
- August 10th at Genessee Tile, Burton, MI, sponsored by Atlas Concorde -- GPTP
- August 17th at Daltile in Elk Grove Village, IL. -- GPTP
- August 26th at America’s Floor Source in Columbus, Ohio -- Thick-Bed Installation
Demand for this free training is high. Be sure to register early. To ensure the best training experience possible, registration is limited. If the class is full, your registration will be added to our waiting list and you will be contacted if a seat opens.
Report Abusive Comment