USG Corporation’s Durock^™ Brand CST^™ Moisture Vapor Reducer is a single-component moisture mitigation system that reacts with the free calcium at the concrete paste layer to create a permanent moisture barrier without changing the surface profile.

Tenax’s FixTop Deck is a slow-curing, super strong, 100% pure epoxy tile and stone adhesive. Perfect for setting countertops or tile on substrates when a slow-curing glue is needed, it is easy to mix, with a smooth consistency perfect for troweling.

New or remodeling projects can become challenging when critical substrates are damaged by years of use. What’s the advantage of renovating versus demolition? Costs and labor can be mitigated when a load-bearing substrate can be rehabbed.

To help installers achieve faster results, Schluter-Systems is providing its Kerdi waterproof membrane in a roll twice as wide as the previous roll. The new roll is 6 feet, 7 inches wide. The length remains 98 feet, 5 inches so there is 646 square feet on each wide Kerdi roll.

Introducing the new QEP Cork Plus Underlayment, an exclusive composite blend of 65% natural cork and 35% EVA foam. All of the EVA foam is collected from recycled shoes. It is available in 200-foot rolls or 2- x 3-inch sheets.

Prodeso Membrane by Progress Profiles is an uncoupling and waterproofing membrane in polyethylene with drop-shaped cavities for problematic supports and horizontal surfaces of any size. Prodeso waterproofs the substrates in the case of overlaying on cracked or imperfectly cured floors with a risk of vapor stress.

NAC Products’ Strataflex^® is a 40-mil.-thick (1/16-inch-thick), peel-and-stick sheet membrane designed for use on interior or exterior floor surfaces that require waterproof protection.

Fracture Guard FD is a low VOC, fast-drying crack isolation membrane specifically formulated by Merkrete for same-day tile installations. Fracture Guard FD provides a thin protection layer to inhibit substrate crack transfers up to 1/8 inch.

Mapeguard UM is a lightweight waterproofing and vapor pressure-equalizing underlayment membrane from MAPEI. It provides crack suppression for use under ceramic tile and stone installations, for both residential and commercial applications.

Flex-Guard and Speed-Flex are “peel-and-stick” crack isolation and anti-fracture membranes from Flex Guard Products, Inc. that do not require primer prior to installation. These membranes are easy to install, lightweight, and easy to handle and cut (no tar residue).